Learn / Electrical Workflow Videos
Ungrouping Arrayed Fixtures and Circuiting
Electrical · Lighting System · 53s
This lesson teaches how to effectively ungroup arrayed fixtures in Revit to enable circuiting. You'll learn the step-by-step process of selecting and ungrouping fixtures, allowing you to power them appropriately.
Key skills covered include using the right-click method to select all instances, circuiting fixtures to a lighting panel, and tagging your circuits for clarity.
Transcript
One thing to note if you're using the array tool though is that you can't circuit in the array. So once you have it all laid out, you actually need to ungroup them. So we're gonna click ungroup on each grouping. Over here, ungroup and ungroup. And then same thing here. So you might have to select them all. The best way to do this is to right click, select all instances visible in view, and ungroup them all at once. Now you have the ability to power them up. So we can go ahead and circuit them and it's going to feed it to lighting panel one. I'm going to do all the arc wiring and circuit it.
Label the circuit, and there we go. Okay. So now our our fixtures are placed, circuited, and tagged.